diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index c2f6b8a..e822a59 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -49,7 +49,8 @@
 #endif
 
 /* On a Cameron or on a FO300 board or ...				*/
-#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300)
+#if !defined(CONFIG_CAM5200) && !defined(CONFIG_CHARON) \
+	&& !defined(CONFIG_FO300)
 #define CONFIG_STK52XX		1	/* ... on a STK52XX board		*/
 #endif
 
@@ -79,7 +80,7 @@
 							/* switch is open */
 #endif	/* CONFIG_FO300 */
 
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
 #define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 #define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
 #define CONFIG_PS2SERIAL	6	/* .. on PSC6			*/
@@ -92,7 +93,7 @@
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  */
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
 #define CONFIG_PCI		1
 #define CONFIG_PCI_PNP		1
 /* #define CONFIG_PCI_SCAN_SHOW	1 */
@@ -140,7 +141,8 @@
 #define CONFIG_ISO_PARTITION
 
 /* USB */
-#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
+#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
+    defined(CONFIG_STK52XX)
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 #define CONFIG_USB_STORAGE
@@ -204,13 +206,15 @@
 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
 #endif
 
-#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
+#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
+	defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
     #define CONFIG_CMD_IDE
     #define CONFIG_CMD_FAT
     #define CONFIG_CMD_EXT2
 #endif
 
-#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
+#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
+	defined(CONFIG_STK52XX)
     #define CONFIG_CFG_USB
     #define CONFIG_CFG_FAT
 #endif
@@ -291,7 +295,9 @@
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"addcons=setenv bootargs ${bootargs} "				\
 		"console=${console},${baudrate}\0"			\
-	"flash_self_old=sete console ttyS0; run ramargs addip addcons;"	\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"flash_self_old=sete console ttyS0; "				\
+		"run ramargs addip addcons addmtd; "			\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"flash_self=run ramargs addip addcons;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
@@ -303,7 +309,7 @@
 		"sete console ttyS0; run nfsargs addip addcons;bootm\0"	\
 	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
 		"tftp ${fdt_addr_r} ${fdt_file}; "			\
-		"run nfsargs addip addcons; "				\
+		"run nfsargs addip addcons addmtd; "			\
 		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
 	CUSTOM_ENV_SETTINGS						\
 	"load=tftp 200000 ${u-boot}\0"					\
@@ -420,7 +426,7 @@
 #define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT		"nor0=TQM5200-0"
 
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
 # if defined(CONFIG_TQM5200_B)
 #  if defined(CONFIG_SYS_LOWBOOT)
 #   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:1m(firmware),"	\
@@ -566,6 +572,7 @@
  * use PSC1: Bits 29-31 (mask: 0x00000007):
  *	 100 -> UART (on all boards).
  */
+#if !defined(CONFIG_SYS_GPS_PORT_CONFIG)
 #if defined (CONFIG_MINIFAP)
 # define CONFIG_SYS_GPS_PORT_CONFIG	0x91000004
 #elif defined (CONFIG_STK52XX)
@@ -585,6 +592,7 @@
 #else  /* TMQ5200 Inbetriebnahme-Board */
 # define CONFIG_SYS_GPS_PORT_CONFIG	0x81000004
 #endif
+#endif
 
 /*
  * RTC configuration